|
Special Shank Screws for Turning and Milling Cutters (Hardness grade 16.9 Special stainless steel)
Suitable for replacing the traditional material (SCM435 alloy steel), the strength exceeds that of the existing turning (milling) screw, and the service life and the operation efficiency of the turning (milling) cutter shank have improved tremendously. Using this particular material, the service life of our screws is longer than that of the traditional screw and is a more budget choice.
- Advantages:
- Excellent resistance to corrosion:
- Not easy to be stuck due to the corrosion of screws, saving the trouble of using the anti-jam glue frequently and the time on gluing operation.
- The inner teeth of the screw and the cutter shank are not easy to rust, so it will not cause the screw to be stuck or unable to be loosened or locked smoothly.
- High hardness and strength:
- The Torx (six-lobe) hole (needle type) is not easy to be damaged or deformed, and even more difficult to break its head, which can avoid the need to replace the entire cutter shank.
- The screws can be locked tightly:
- Avoid missing its notch, caused by frequent vibration of the tool blade during the construction process, and reduce the service life of the tool blade, saving the operating time substantially and the consumables cost of replacing the tool blade.
- The screw can be tightly locked, which improves the workpiece surface accuracy considerably.
|
